Pasar al contenido principal
Container Specifications

Sobrescribir enlaces de ayuda a la navegación

Container Specifications

Find the right equipment for your shipping needs.

Dry

This type of container is for general cargo. General cargo should not be over-length, over-width, over-height, over-weight, or in bulk. Containers are constructed of steel for sturdiness and ease of repair. 45ft containers are not generally available in all the trades ONE operates.

DRY CONTAINER - 20 FEET   

  Specifications for 8'6" / 30,480kg
Inside Measurement Length (mm)
Width (mm) 
Height (mm)
5,898
2,350
2,390
Door Opening Width (mm) 
Height (mm)
2,340
2,280
Load Capacity (m³) 33.1
Tare weight (kg) 2150
Pay Load (kg) 28,330

 

DRY CONTAINER - 40 FEET                 

  Specifications for 8'6" / 30,480kg
Inside Measurement Length (mm)
Width (mm) 
Height (mm)
12,032
2,350
2,390
Door Opening Width (mm) 
Height (mm)
2,340
2,280
Load Capacity (m³) 67.6
Tare weight (kg) 3640
Pay Load (kg) 26,840

 

DRY CONTAINER - 40 FEET HIGH CUBE

  Specifications for 9'6'' / 30,480kg / 32,500kg
Inside Measurement Length (mm)
Width (mm) 
Height (mm)
12,032
2,350
2,695
Door Opening Width (mm) 
Height (mm)
2,340
2,585
Load Capacity (m³) 76.2
Tare weight (kg) 3700
Pay Load (kg) 28,800

 

DRY CONTAINER - 45 FEET

  Specifications for 9'6'' / 30,480kg / 32,500kg
Inside Measurement Length (mm)
Width (mm) 
Height (mm)
13,556
2,352
2,697
Door Opening Width (mm) 
Height (mm)
2,340
2,585
Load Capacity (m³) 86.0
Tare weight (kg) 4650
Pay Load (kg) 27,850

 

Please note this is for reference only. Individual containers may have different specifications from the measurement shown above. For further information, please contact your local ONE office.

Reefer

This type of container is capable of maintaining the temperature of frozen, chilled or warm cargo. A refrigeration unit is built onto the nose of the container and power is provided by a motor generator (when container is on wheels), by terminal (when grounded in a yard) or by the ship (when laden on board).

Air, cold or warm, is supplied to the inside of a container via an air duct system that enters the container from the bottom. Air circulates under, over and through the load before it returns to the refrigeration unit. This circulation is repeated continuously when the unit is in operation.

In the nose of each refrigeration units are adjustable ventilation holes. At specific settings, these vents allow fresh air exchanges to avoid a build up of carbon dioxide inside the container. All fresh fruits and vegetables are living products and as a result give off heat and carbon dioxide. Vents allow this warm toxic air to be expelled from the container in order to avoid spoilage.

The most advanced reefer containers are computerized enabling highly precise temperature control. Transportation has become easier due to this type of precise control that ensures preserving the quality of foods such as meat, fish, eggs, vegetables and fruits, as well as films, plants and pharmaceuticals.
 

REEFER CONTAINER - 20 FEET

  Specifications for 8'6" / 30,480kg
Inside Measurement Length (mm)
Width (mm) 
Height (mm)
5,456
2,288
2,263
Outside Measurement Length (mm)
Width (mm) 
Height (mm)

6,058
2,438
2,591

Door Opening Width (mm) 
Height (mm)
2,290
2,221
Load Capacity (m³) 28.2
Tare weight (kg) 2810
Pay Load (kg) 27,670

 

REEFER CONTAINER - 40 FEET HIGH CUBE

  Specifications for 9'6" / 34,000kg
Inside Measurement Length (mm)
Width (mm) 
Height (mm)
11,590
2,284
2,544
Outside Measurement Length (mm)
Width (mm) 
Height (mm)
12,192
2,438
2,896
Door Opening Width (mm)
Height (mm)
2,290
2,502
Load Capacity (m³) 67.5
Tare weight (kg) 4490
Pay Load (kg) 30,510

Please note this is for reference only. Individual containers may have different specifications from the measurement shown above. For further information, please contact your local ONE office.

Flat Rack

Flat racks are best suited for stowage of heavy lift, over-height and/or over-width cargo. Flat racks have collapsible end frames. Lashing rings on the bottom side rails, corner posts and floor are available to enable cargo to be secured using straps or chains.
 

FLAT RACK CONTAINER - 20 FEET

  Specifications for 8'6" / 34,000kg
Inside Measurement Length (mm)
Width (mm) 
Height (mm)
5,568 (between corner posts)
2,194 (between side rails)
2,213
Outside Measurement Length (mm)
Width (mm) 
Height (mm)
6,058
2,438
2,591
Load Capacity (m³) 28.4
Tare Weight (kg) 3100
Pay Load (kg) 35,000

 

FLAT RACK CONTAINER - 40 FEET

  Specifications for 8'6" / 45,000kg
Inside Measurement Length (mm)
Width (mm) 
Height (mm)
11,652 (between corner posts)
2,208 (between side rails)
1,955
Outside Measurement Length (mm)
Width (mm) 
Height (mm)
12,192
2,438
2,591
Load Capacity (m³) 53.2
Container weight (kg) 6,200
Max Load Weight (kg) 38,800

 

FLAT RACK CONTAINER - 40/HC

  Specifications for 9'6" / 58,600kg
Inside Measurement Length (mm)
Width (mm) 
Height (mm)
11,658 (between corner posts)
2,374 (between side rails)
2,264
Outside Measurement Length (mm)
Width (mm) 
Height (mm)
12,192
2,438
2,896
Load Capacity (m³) 64.3
Tare Weight (kg) 6250
Pay Load (kg) 52,500

Please note this is for reference only. Individual containers may have different specifications from the measurement shown above. For further information, please contact your local ONE office.

Open Top

Open tops do not have a solid roof; instead they are covered with a removable, waterproof tarpaulin that can be secured with ropes. The metal beam above the door can be opened to the right or left and can also be dismantled from the container. Lashing rings at the inside base of the container are used to secure and prevent shifting of cargo during movement. This type of container is suitable for over-height and/or lengthy cargo.

OPEN TOP CONTAINER - 20 FEET

  Specifications for 8'6" / 30,480kg
Inside Measurement Length (mm)
Width (mm) 
Height (mm)
5,898
2,350
2,348
Door Opening Width (mm) 
Height (mm)
2,340
2,280
Roof Opening Length (mm)
Width (mm)
5,680
2,252
Swing header opening Width(mm) 1,940
Load Capacity (m³) 32.5
Tare weight  (kg) 2240
Pay Load (kg) 28,240

 

OPEN TOP CONTAINER - 40 FEET

  Specifications for 8'6" / 30,480kg
Inside Measurement Length (mm)
Width (mm) 
Height (mm)
12,022
2,350
2,348
Door Opening Width (mm) 
Height (mm)
2,340
2,280
Roof Opening Length (mm)
Width (mm)
11,798
2,230
Swing header opening Width(mm) 1,940
Load Capacity (m³) 66.3
Container Weight (kg) 3,880
Max. Load Weight (kg) 26,600

 

OPEN TOP CONTAINER - 40/HC

  Specifications for 9'6" / 32,500kg
Inside Measurement Length (mm)
Width (mm) 
Height (mm)
12,032
2,352
2,653
Door Opening Width (mm) 
Height (mm)
2,340
2,585
Roof Opening Length (mm)
Width (mm)
11,806
2,192
Swing header opening Width(mm) 1,940
Load Capacity (m³) 75.1
Tare weight  (kg) 3890
Pay Load (kg) 28,610

Please note this is for reference only. Individual containers may have different specifications from the measurement shown above. For further information, please contact your local ONE office.